top of page

B2S Collection Part 1

Happy Wednesday! This week’s blog is part one of three blog series about our August Collection: “B2S.” This part of the collection includes a lot of “Magic School Bus/ Ms. Frizzle inspired key chains. I think a lot of these turned out pretty cool!

We are pretty excited about how cute these turned out! We found some cool school stickers that we used! We have had this stuff for a while, and we decided to put it to good use. These would be super cute to have before school starts! They would also be a great way to show love to teachers and would make excellent gifts.

I mixed the resin together. The resin comes in two parts: a resin and a hardener. You mix it at a 1:1 ratio measured by volume, meaning it requires equal amounts of both resin and hardener. Mixing the resin and hardener together creates a chemical reaction, transforming them from a liquid into a solid. Then I poured a little resin into each mold. I added the glitter into the resin. An hour later, we added the school stickers into the glitter resin mix. Then I filled the molds the rest of the way up! I used the heat gun to draw some of the bubbles out. These will need to dry for at least 24 hours. Then you pop them out of the molds and sand the rough edges. Lastly, I attached a jump ring to work as the hook the pendant and then attach another ring to attach them to a key ring.

Here is our new video showing the process:

I hope you check it out! Keep a watch for next week’s B2S blog and video about making stamp key chains (which will be posted next Wednesday)! If you get a chance, leave a comment telling us what you think!! If you haven’t already, you should become part of our community so you can get the August Newsletter (and all the future newsletters and specials too!!)

And follow us on Facebook:

and Instagram:

Thanks for being part of our Crazy! Until next time...

14 views0 comments

Recent Posts

See All
bottom of page